Tamiya TS spray paint is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints. Therefore, following the painting of the entire assembly, details can be added or picked out using enamel and/or acrylic paints.
Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/24 scale sized car model bodies.
Bob Smith
Maxi-Cure Extra Thick 1/2 oz.
BSI-111
Regular price
$4.79
Save $-4.79
Bob Smith Industries BSI-111 Maxi-Cure 1/2 oz Extra thick Super Glue
Tamiya
Tamiya Polycarbonate Spray Paint 100ml.
TAM86001
Regular price
$7.75
Save $-7.75
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
Testors
1oz. Liquid Cement w/Applicator
281216
Regular price
$10.49
Save $-10.49
- Use for polystyrene and ABS plastic
- Bonds plastic by dissolving and cementing
-Precision applicator
Testors
Testors Cement For Plastic 5/8 oz.
3501
Regular price
$3.49
Save $-3.49
Testors 3501X Model Glue, 5/8 Ounce, Cement for Plastics (One Tube)
Bob Smith
Insta-Set Accelerator
BSI-151
Regular price
$6.99
Save $-6.99
Bob Smith Industries BSI-151 Insta-Set Super Glue Accelerator,Clear, 2 fl. oz.
Testors
Testors 1/4 oz Paint Flat Black
1149
Regular price
$3.29
Save $-3.29
Enamel 1/4 oz Flat Black
Bob Smith
Insta-Cure 1/2 oz. Gap Filling Med.
BSI-106
Regular price
$4.79
Save $-4.79
Bob Smith Industries BSI-106 Gap Filling Medium Glue 1/2oz Insa-Cure+, 5-10 Sec
Tamiya
Tamiya Acrylic Paint 1/3oz. Flat Black XF1
81701
Regular price
$2.90
Save $-2.90
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrene resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly, and can be blended easily. Prior to curing, paint can be washed away with plain water.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077.
X designated colors have a glossy finish while XF designated colors are flat finish. The paint can be thinned for airbrushing using Tamiya X-20A Acrylic thinner. The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish. For better paint brushing results use Tamiya Paint Retarder (87114) for a smoother brushstroke free finish.
Excel
Hobby Blades K-18 Grip Item
16018
Regular price
$7.95
Save $-7.95
Excel Blades - K18 Grip-on Knife
16018
Excel Blades' favorite paper cutter!
K18 Cushion grip knife comes with #11 double honed blade
Precision knife with special screw for extra blade security and stabilization
Excel Blades K18 knife is available in black, blue, green, grey, red and purple.
Used for: precision paper cutting, trimming card-stock and rubber, stripping of paper
Used by: graphic artists, designers, hobbyists, scrapbook artists and crafters
Grip-On Knife fits with Excel Blades #5, #6, #10, #11, #12, #13, #16, #17, #17A and #21.
.375 x 5 in - .9 x 12.7 cm
Made in the USA
Tamiya
Tamiya Acrylic Paint 1/3oz. Black X1
81501
Regular price
$2.90
Save $-2.90
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrene resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly, and can be blended easily. Prior to curing, paint can be washed away with plain water.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077.
X designated colors have a glossy finish while XF designated colors are flat finish. The paint can be thinned for airbrushing using Tamiya X-20A Acrylic thinner. The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish. For better paint brushing results use Tamiya Paint Retarder (87114) for a smoother brushstroke free finish
Bob Smith
Tire Glue 1/2 oz.
BSI-117
Regular price
$7.99
Save $-7.99
BSI IC-2000 Black Rubber Toughened CA (1/2oz) BSI-117
Excel
#11 Double Honed Blades
20011
Regular price
$3.34
Save $-3.34
Description
Made from carbon steel
Available in packs of 5, 15, 100, 500, 1000
The double honed replacement blade has a strong tip and flex so you do not have to worry about breaking their edge and tip.
This versatile replacement blade fits with all standard light and medium duty xacto style knives.
Used with: cuts on paper, card-stock, stencils, film, photographs, tape, plastic, cork, wood, vinyl, cloth, leather, cardboard, foam boards and most other light-weight crafting.
Used for: model making, paper cutting, cake decorating, cricut vinyl cutting and polymere clay.
Used by graphic artists, architects, car wrappers, designers, hobbyists, scrapbook artists and crafters.
