Bob Smith Industries BSI-111 Maxi-Cure 1/2 oz Extra thick Super Glue
Tamiya Polycarbonate Spray Paint 100ml.
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
Flame resistant recovery wadding protects the recovery system and is necesary to launch model rockets.
Bob Smith Industries BSI-151 Insta-Set Super Glue Accelerator,Clear, 2 fl. oz.
Testors Cement For Plastic 5/8 oz.
Testors 3501X Model Glue, 5/8 Ounce, Cement for Plastics (One Tube)
Insta-Cure 1/2 oz. Gap Filling Med.
Bob Smith Industries BSI-106 Gap Filling Medium Glue 1/2oz Insa-Cure+, 5-10 Sec
Hobby Blades K-18 Grip Item
Excel Blades - K18 Grip-on Knife
Excel Blades' favorite paper cutter!
K18 Cushion grip knife comes with #11 double honed blade
Precision knife with special screw for extra blade security and stabilization
Excel Blades K18 knife is available in black, blue, green, grey, red and purple.
Used for: precision paper cutting, trimming card-stock and rubber, stripping of paper
Used by: graphic artists, designers, hobbyists, scrapbook artists and crafters
Grip-On Knife fits with Excel Blades #5, #6, #10, #11, #12, #13, #16, #17, #17A and #21.
.375 x 5 in - .9 x 12.7 cm
Made in the USA
Male Ultra Plug 2 Pack
The industry standard in high performance connectors. Rated number one by R/C Car Action, The Ultra Plug actually has less resistance, including the solder joints, than an equivalent length piece of 12 gauge wire.
Insta-Cure Gap Filling Med. 1 oz.
Bob Smith Industries BSI-107 INSTA-CURE+ 1 OZ.
Jet Stream Glider
A 13 1/4" wing span motorplane that flies hand launches or right off the ground. Colorfully printed wing, canopy, and tail surfaces. Formed wire landing gear, plastic propeller and nose bearing. Ideal contest flyer.
A hefty glider especially designed for strong "baseball arms". Kids love to rear back and heave this racy job.
150mAh 1S 3.7V 25C LiPo Battery
This battery will also work in the following product:
L – 1.575/ H – 0.350 / E - 0.975/ S – 0.250/ T – 0.020
Made in the USA
Rocket Engine A8-3
Engines and Starters/Igniters will be shipped USPS Ground
3 – A8-3 Engines 4 – Starters 4 – Starter Plugs
Testors 1/4 oz Paint Thinner
Sky Streak Airplane
A long time best selling motorplane. This toy airplane has a one piece wing with a built-in dihedral. The propeller and nose bearing made of hi-impact plastic.
Tamiya Acrylic Paint 1/3oz. Black X1
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrene resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly, and can be blended easily. Prior to curing, paint can be washed away with plain water.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077.
X designated colors have a glossy finish while XF designated colors are flat finish. The paint can be thinned for airbrushing using Tamiya X-20A Acrylic thinner. The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish. For better paint brushing results use Tamiya Paint Retarder (87114) for a smoother brushstroke free finish
Sport Power 40C 7.4V 5000Mah
Venom® DRIVE series LiPo batteries are engineered for the demanding requirements of todays RC car, truck and boat applications. Utilizing the latest advancements in lithium polymer technology and select materials for improved performance, safety and cycle life: DRIVE provides premium and reliable energy to power your passion.
This Venom® 40C 2S 5000mAh 7.4V LiPo ROAR Hardcase battery with UNI 2.0 is perfect for most 1/8 and smaller brushed RC boats, 2WD and 4WD brushless cars, monster trucks and buggies and is built with a molded hardcase for added protection and durability. Venom®DRIVE batteries now also include the Venom®Universal 2.0 Plug System for the ultimate in connectivity. Utilizing a high current Amass XT60 base plug, use the correct Venom®UNI 2.0 adaptor for Traxxas®legacy, Deans™ or EC3™ adaptor to allow for solder-free plug conversion and plug and play use with todays most popular RC vehicles.
Available in a wide range of sizes, capacities and C rates there is a Venom® DRIVE battery to suit most applications. As an industry leader in RC batteries and chargers for over a decade, Venom® is a name you can count on for the power and performance you demand.
Venom Uni 2.0
Maximum Burst Discharge Rate
Maximum Charge Rate
Maximum Continuous Discharge Rate
9.2 oz (262 g)
UGears U-Fidgets 4 piece vehicle set is a unique miniature model. The miniature models are a sports car, tractor, truck and a tramcar. Are you experiencing anxiety, losing focus or trying to quit a bad habit? UGears U-Fidgets vehicle could be of help. These 4 unique sets of individual miniature models of a sports car, tractor, truck and tramcar makes a Perfect gift for grown- ups and kids. The part count is 14-18 pieces depending on the vehicle and the assembly time is about 30 minutes.
Maxi-Cure 1 oz. Extra Thick BSI-112
BSI112 Bob Smith Industries MAXI-CURE Extra Thick CA (1oz)
Insta-Cure Super Thin 1/2 oz.
BSI 101 Cyanoacrylate(CA) 1/2oz Super Thin -Blue Label
Catapult Glider 36
A high flying 12" wing span sling-launched glider with a piggy-back Shuttle plane. Plastic handle and rubber launcher included
A king size motorplane that, fully wound, takes off from the ground under its own power for a long extended flight. Smoothly shaped body, formed landing gear plus a plastic propeller and nose bearing.