Directions for use:Mix well before use. Use a paint brush or airbrush with a large tip to apply a thick even coat. Allow mask to dry or use a blow dryer* to speed up dry time and repeat application of mask (3-4 coats if brushing, 5-6 coats if using an airbrush) until thick enough that it will allow you to cut through with a hobby knife and peel away the sections you want to paint (You may have difficulty removing the mask if applied amount is too thin). The average RC body requires 2-3 ounces depending on the amount of surface the mask is applied to.
*Adding heat can over-bond the mask, making it harder to remove.

Features:

Flexible application brush or spray
Conforms to curves, corners, and details with ease.
Clean, easy removal with no residue.
Ideal for custom graphics, trim work, lettering, and more.
Perfect for hobbyists, pros, and everyone in between.

Tamiya

Acrylic Mini XF27, Black Green

XF-27

$3.00

Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrene resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly, and can be blended easily. Prior to curing, paint can be washed away with plain water.

When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077.

X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be thinned for airbrushing using Tamiya X-20A Acrylic thinner.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Tamiya Paint Retarder (87114) for a smoother brushstroke free finish.

Tamiya

Tamiya Acrylic Paint 23mm. Deck Tan XF55

$3.80

Tamiya

Acrylic Paint 23ml Park Green X-28

81028

$3.80

Bob Smith Industries BSI 116 IC-GEL Insta Cure Frag Plant Glue 20g Cyanoacrylate