Repair or customize your RC car or truck! We carry parts for most big-name RC manufacturers including some discontinued, hard-to-find parts to keep your older vehicles in tip-top shape.
Narrow the track width of your Trophy Truggy with these optional 5mm hex adapters. Narrowing the width can help fine-tune the handling balance of your buggy. These are the stock hex adapters for the Trophy Buggy.
Can also be used to upgrade the Trophy Truggy to 17mm hex adapters!Use these parts in combination to upgrade the driveshafts to universal dogbones and change the threaded axles to 17mm hexes!#66479Universal Joint#101061Rear Wheel Axle 2 x#101785or#101792Wheel Hex Adapter With these parts you will be able to use standard truggy wheels on your Trophy Truggy!
HPI Box 13
HPI
50T Center Spur Gear
101188
Regular price
$25.00
Save $-25.00
TROPHY 4.6 TRUGGY RTR / TROPHY TRUGGY FLUX RTR
HPI Box 13
HPI
Front Axle Shaft (2pcs)
116873
Regular price
$22.00
Save $-22.00
The Front Axle Shaft transfer drive from the differential to the wheels. Manufactured from solid steel for strength and durability.
HPI Box 13
HPI
Suspension Arm Set
85238
Regular price
$20.00
Save $-20.00
Llightweight suspension arms deliver quick suspension response and reduce the overall weight of the truck. The improved design of the wishbones ensures they keep their strength and durability.
HPI Box 14
HPI
Wheelie Bar Set for Savage
85245
Regular price
$26.00
Save $-26.00
Keeps Savage stable during wheelies/Includes two wheels for high and low wheelies
Make your Savage perform awesome wheelies with the most exciting accessory from HPI... theSavage Wheelie Bar.TheSavage Wheelie Baropens a whole new world of Savage stunt - a new challenge to control your Savage on two wheels.
Designed to perfection it provides stability while the front wheels are off the ground. By using this fantastic Wheelie Bar it will stop your Savage from flipping over when on full throttle and it will allow you to pull perfect wheelies every time, for as long as you are capable of holding your Savage up. For best efficiency and durability the wheelie bar wheel is ball raced with two high quality ball bearings. And with2 different size wheels includedyou can achieve BIG wheelies and even BIGGER wheelies! All fixings you need for mounting are included. Simply attach the wheelie bar to the rear bumper of any of the HPI Savages and see how high you can make your Savage go!See the Savage Wheelie bar in action in our short action video clip!
HPI Box 14
HPI
F/R Suspension Arm Truggy
101176
Regular price
$15.00
Save $-15.00
TROPHY 4.6 TRUGGY RTR / TROPHY TRUGGY FLUX RTR
HPI Box 14
HPI
Hard Differential Gear Set (Trophy Series)
101142
Regular price
$20.00
Save $-20.00
Install these hardened diff gears in your Trophy 3.5 to dramatically increase the durability and lifetime of the diffs between maintenance rebuilds! A full set of gears are included to fully outfit one diff with hardened gears.
Differential gear (45-tooth)/ side cover plate & screws
TRA4181
Regular price
$3.50
Save $-3.50
HPI
Rear Pins of Lower Suspension (Trophy Series)
101020
Regular price
$6.00
Save $-6.00
#101020 - FRONT & REAR INNER PIN OF LOWER SUSPENSION
HPI Box 13
HPI
Turnbuckle M5x60mm (2pcs)
93627
Regular price
$10.00
Save $-10.00
Turnbuckles for HPI's Hellfire. They are fully adjustable allowing easy setup of camber and toe-in.
HPI Box 13
HPI
Driveshaft 6x82mm (2pcs)
86813
Regular price
$15.00
Save $-15.00
#86813 - DRIVE SHAFT 6x82mm (2pcs)
HPI Box 13
HPI
Turnbuckle 4-40x90mm (2pcs)
93342
Regular price
$6.00
Save $-6.00
#93342 - TURNBUCKLE 4-40x90mm (2pcs)
HPI Box 13
HPI
Gear Shaft 5x6x29mm
86810
Regular price
$8.00
Save $-8.00
#86810 - GEAR SHAFT 5x6x29mm
HPI Box 13
HPI
Gear Set for Motor Unit
87114
Regular price
$25.00
Save $-25.00
#87114 - GEAR SET FOR MOTOR UNIT
HPI Box 13
HPI
Idler gear 30T (Savage 3 Speed)
Regular price
$30.00
Save $-30.00
Savage owners can now get the same parts that were used to win the 2003 Savage Slam event on the Savage factory truck driven by team driver Thad Garner. These universal dog-bones replace the centre drive-shafts of all Savage trucks and deliver improved durability and more efficiency than the stock part. They're machined from high strength steel, hard chromed for a shiny durable finish that is easy to clean and looks great, and fully rebuildable to add extra life when it comes time for maintenance. The unique "muscle bone" design makes these extremely durable and perfect for extreme driving conditions and competitive racing. These universal dog-bones are factory designed, factory manufactured and team tested for the best fit and durability on the market.
HPI Box 13
HPI
Universal Dogbone 8x93mm
86270
Regular price
$30.00
Save $-30.00
Savage owners can now get the same parts that were used to win the 2003 Savage Slam event on the Savage factory truck driven by team driver Thad Garner. These universal dog-bones replace the centre drive-shafts of all Savage trucks and deliver improved durability and more efficiency than the stock part. They're machined from high strength steel, hard chromed for a shiny durable finish that is easy to clean and looks great, and fully rebuildable to add extra life when it comes time for maintenance. The unique "muscle bone" design makes these extremely durable and perfect for extreme driving conditions and competitive racing. These universal dog-bones are factory designed, factory manufactured and team tested for the best fit and durability on the market.
