• Screw Shaft M3x2.5x11m (10pcs)

• Precision hex head for the best fit which helps prevent stripping

• Made from durable black coated steel

This ARRMA AMASS XT90 Female Loop connector allows the use of a 4S or 6S LiPo battery pack in your ARRMA vehicle. It should be connected to one of the ESC-to-battery plugs when using a single 4S or 6S battery.

The XT90 connector provides a super reliable, efficient connection between the ESC and battery.

Includes

1 x Female XT90 Loop Connector

Compatible with Everest-10 (standard front shocks for Everest-10 car) 

Has harder spring rate than Rear Shocks

QUICRUN Fusion PRO 2in1 FOC System (2300kV)

The design has been integrated and optimized to provide a cleaner
and sleeker layout appearance. The overall length is now at 58mm, 6mm shorter than the previous version. The smaller footprint provides for a spacious, easy assembly process.

Supports a variety of application needs such as the "constant speed
mode (forward and reverse)", "normal mode (forward and reverse with
brake)" and "normal mode without constant speed function
(Forward and Reverse)

The IP-67 waterproof system guarantees excellent water and dust protection. The whole power system is able to drive on a variety of surfaces, including mud, sand, ice, and snow without damaging the power unit.

The ESC is equipped with 13 adjustable parameters for fine-tuning adjustments. New parameters such as "maximum
braking force", "speed fluency", "start mode ( Punch)", "throttle
midpoint area" and other practical parameters are included.

Specifications:

• Current Rating: 60A Continuous / 200A Peak
• Input Voltage: 2-3S Lipo, 6-9 Cells NiMH
• Motor Poles: 4
• Size: 37mm (diameter) / 58mm (length)
• Weight: 209g (including wires & connectors)
• BEC Output: 6V/7.4V, 6A

Part #8374 

Description

Traxxas Revo True-Track Rear A-arm Conversion fits older versions of the Traxxas Revo black- does not fit the Revo 2.0

• For use on the Revo
• Tech Notes: These rear end kits work on all versions of the Traxxas Revo. These kits will not with Traxxas (No.5356) 120-LT Long Travel Rockers
• Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability
• RPM is a proud American manufacturer designing and manufacturing 100-Percent of our molded products right here in the United States

From the Manufacturer

The RPM True-Track Rear A-arm Conversion Kit for the Revo eliminates some of the biggest headaches associated with toe link rear ends. Rear toe angles are nearly impossible to set accurately and there isn't a gauge currently made that can accurately identify whether each individual wheel’s toe angle is set correctly in relation to the chassis. The RPM True-Track rear end kit completely eliminates the rear toe links, locking in the rear toe angle at a solid 1.5 degrees per side for a total rear toe-in angle of 3 degrees. By getting rid of the rear toe links, we’ve completely eliminated all rear bump steer. That means the rear toe angle remains consistent throughout the entire range of suspension travel, providing superior rear end tracking regardless of the terrain. All aspects of the RPM True-Track Conversion Kit have been beefed up for rugged durability and slop free movement throughout its range of travel. Additionally, we’ve incorporated our oversized bearings into the new RPM axle carrier design, providing an additional 2mm more bearing contact with the axle while doubling the bearing load rating and tripling the fatigue rating over the stock bearings. What’s Included: Our Revo True-Track Rear End Kit consists of two upper rear A-arms, two lower rear A-arms, two beefy rear axle carriers, two outer 6x15mm sealed bearings, two inner 12x21mm sealed bearings, two aluminum pivot ball setscrews, two delrin pivot ball bushing cups, two M3x16mm shock mount screws, two 4mm diameter tool steel hinge pins and enough e-clips to get the job done (4 minimum).

This is a set of four RC4WD Breaker 1.0" Scale Beadlock Wheels.

Features:

• CNC machined
• Billet aluminum
• Silver anodized finish
• Fits standard 7mm hex
• Fits 1.0" size tires

Specs:
Wheel Size: 1.0"
OD: 1.09in / 27.5mm
Width: 0.59in / 15.0mm
Center Hole OD: 0.1in / 2.5mm
Positive Offset: 0.27in / 7.0mm
Each Weigh: 0.44oz / 12.5g

Includes:
4x Breaker 1.0" Scale Beadlock Wheels
1x Miniature Scale Hex Bolt Tool for M1.6 Scale Bolts (1.5 mm Hex)

Notes:
Fits RC4WD 1/18 Gelande II RTR w/D90 Body Set (Blue)
Fits RC4WD 1/18 Gelande II RTR w/BlackJack Body Set
Fits RC4WD 1/18 Gelande II RTR w/Black Rock Body Set
Fits RC4WD 1/18 Gelande II RTR w/D90 Body Set (Black)

Product Description

PRODUCT FEATURES

Includes set screws, replacement pins, and pin capturing sleeves.