Features
2-6S LiPo (25.2V) compatibility in vehicles up to 11.lbs with battery and ready-to-run.
Smooth sensorless motor operation with included 1515-2200kv sensored* brushless motor
Large 6.5mm female motor bullet connectors (male connectors sold separately)
Waterproof** design ESC and splash resistant 30mm fan
Powerful 5.5 volts fixed, 8 Amps Peak BEC
LED error codes for common error conditions
Convenient transmitter programming for nine common adjustable settings
Fully compatible with the Castle Link Programming Suite. See Recommended Items list or Feature Details below for more information.
* Sensored capabilities of the motor cannot be utilized with the Sidewinder 8th ESC, must be run in sensorless mode.
** Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit.
Overview
The Sidewinder 8th is a 1:8 scale, waterproof* combo from Castle Creations capable of 2-6 cells of LiPo power, with an 8 amp peak BEC. This is the perfect upgrade for 1:8 scale buggies, truggies and on-road vehicles as well as 1:10 scale monster trucks weighing up to 11 lbs. It can also work as a great upgrade for some 4WD short course trucks for 3s or 4s operation. It also comes standard with a highly efficient ESC cooling fan.
* Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit.
Recommended Items
Castle Link USB Programming Kit V3 for modifying settings and downloading software updates through Windows
B-LINK Bluetooth Adapter for modifying settings and downloading software updates through the iOS App
Field Link Portable Programmer for modifying ESC settings on the go
What's in the Box?
(1) Sidewinder 8th ESC
(1) Castle 1515-2200Kv brushless sensored* motor
(1) Castle decal sheet
(1) Drivers Ed and Quick Start Guide
* Sensored capabilities of the motor cannot be utilized with the Sidewinder 8th ESC, must be run in sensorless mode.
Feature Details
Castle Link Programming Suite
For over 20 years Castle engineers have been setting the bar for industry leading software functionality. The Castle Link Programming Suite is your ticket to creating the perfect setup. To gain access to the host of tuning parameters simply purchase the Castle Link Adapter and download the simple to install software from our website and you are ready to personalize your controller’s parameters. Or you can utilize the Castle Link iOS App and purchase the B-Link Bluetooth Adapter. Don’t forget to use the “check for updates” feature in Castle Link to download new software as it becomes available. New features are yours at no cost, a perk for choosing Castle.
ESC Settings
Adjustable settings include:
Throttle
Braking curve
Drag brake
Auto LiPo cutoff
Punch Control
Reverse Type
Motor Type
Product Specifications
| Adjustable Timing | Yes |
| Brakes | Proportional |
| Programmable | Yes |
| Connector Type | 6.5mm Bullet |
| Product Length | 2.45" (62.2mm) |
| Auto Cutoff | Yes |
| BEC Continous Current | 4.5A Continuous |
| Number of Poles | 4 |
| Shaft Diameter | 0.197" (5mm) |
| Bushing Or Bearing | Bearing |
| Forward | Yes |
| Wire Gauge | 10 AWG |
| Shaft Length | 0.79" (20mm) |
| BEC | Yes |
| BEC Maximum Burst Current | 8A Peak |
| BEC Voltage | 5.5V Fixed |
| Input Voltage | 2S (7.4V) minimum, 6S (25.2V) maximum |
| Product Height | 1.33" (34mm) |
| RPM/Volt (Kv) | 60,000 / 2200 |
| BEC Type | Fixed voltage, 8A Peak |
| Outer Diameter | With Fins 1.6 in (41.4mm) |
| Product Width | 2.20" (56mm) |